In fact, you cannot show temperature in a GPS view. If you are on a GPS view, do not confuse Bearing with Temperature. Is it a temp reading or a bearing reading? Select the temperature by selecting the depth units. On some fish finders, the temperature units are determined by the depth units.
MAGICANPASTER TEMPERATURES NOT DISPLAYING MANUAL
In this case, refer to your Operations Manual to select the proper temperature units.
If your depth sounder reads both Fahrenheit (F) and Celsius (C), the problem could be that the depth sounder is reading the wrong temperature measurement. If the temperature sensor is built into the transducer and it is installed inside the hull of your boat, you will not get accurate water temperature readings. Try remounting your temperature sensor some place that the water in the immediate vicinity is not artificially heated or cooled by the boat or any equipment on the boat. If the Temperature Sensor on your temperature accessory is mounted on the motor of a trolling motor or close to the water discharge of your main motor, this may cause the temperature readings to be incorrect. Refer to the Operations Manual for correct installation of accessories. If an accessory is not connected, or not connected properly, it could alter the temperature reading. If it is only off by a degree or two, you can use this to menu to adjust the temperature readout of the temperature sensor to match other temperature gauges on your boat. Offset menu, make sure that the Temp offset has not been set to something that is incorrect. If you are certain that the temperature is incorrect and your unit has a Temp. Out temperature probe reads only water surface. If the unit works correctly on your friend's boat, proceed with the appropriate suggestions below. If the unit still has the same problem on your friend's boat, return the unit along with a letter explaining the problem in detail. This will indicate whether the problem is with the head unit or the transducer/temp probe or the installation.
Make sure at least one of these readout sections shows Temp. You can also go out to the Select Readouts menu from your Set Up tab to make sure you have selected temperature to display in one of your Readout locations. It is possible to configure some units so that no temperature information is displayed even though a temperature gauge is functioning properly.If you still do not see temperature, then we need to check other aspects of your screen set up. You will want one or both of them to show as Connected. The built in temp of a transducer will show as Temperature and if you have added an extra or auxiliary temp probe, this will show up as Aux. Also visually inspect them for any damage.Ĭheck the Accessory Test screen in the System Status menu. Make sure that all necessary accessories are connected to the depth sounder. You can also have more than one temperature gauge connected to your unit. This will be shown in your Operations Manual. Make sure your unit is capable of reading Water Temperature. While the screen real estate they use up is at times frustrating, and the options for changing the interface are limited, the overall usefulness outweighs all that.NOTE : For most Humminbird products, temperature is built into your transducer. Our solution during tests was to create a second desktop and place all of them there, but the usefulness of the app is minimized somewhat by doing this. While you can change which items appear and how they appear (there is a minimize option if you double-click any one sticky note), the interface remains a little messy and it eats up a lot of screen real estate. The interface is actually very useful, if not entirely visually pleasing.
MAGICANPASTER TEMPERATURES NOT DISPLAYING WINDOWS
After installation, you can open the app to find numerous windows filled with information about your computer. Magician Paster is available on the App Store so you won't have to deal with any of the standard security issues that come with third-party apps. While there are options to minimize the information or move it to a second desktop in Mission Control, the app lacks enough polish to be something you'd leave on all the time. Magician Paster offers a plethora of useful information about your computer, but is hindered by the intrusive interface used to display it.
0 kommentar(er)
